HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 438

Monitoring and Analyzing Switch Operation Traffic Mirroring Switch Configuration - Network Monitoring Port Monitoring Enabled [No] : Yes Monitoring Port : D5 Monitor : Ports Move the cursor to the Monitoring Port parameter, then use the Space bar to select the local exit port. Port ---D1 D2 D3 D4 D5 D6 D7 D8 Type Action 1000X | 1000X | 1000X | 1000X | 1000X | 1000X | 1000X | 1000X | | Port Type Action | D14 1000X | | D15 1000X | | D16 1000X | | 1 1000T | | 2 1000T | | 3 1000T | | 4 1000T | | S1 | Actions-> Cancel Edit Save Help Select the port that will act as the Monitoring Port. Use arrow keys to change field selection, to toggle field choices, and to go to Actions. Figure B-20. How To Select a Local Exit Port 5. Use the Space bar to select the port to use for sending mirrored traffic to a locally connected traffic analyzer or IDS. (The selected interface must be a single port. It cannot be a trunk.) In this example, port D5 is selected as the local exit port. 6. Highlight the Monitor field and use the Space bar to select the interfaces to mirror: Ports: Use for mirroring ports, or static trunks. 7. Use the down arrow key to move the cursor to the Action column for the individual port interfaces and position the cursor at a port, or trunk you want to mirror. B-31