HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 70
How To Move Between Levels, Moving Between the CLI and the Menu Interface.
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Using the Command Line Interface (CLI) Using the CLI How To Move Between Levels Change in Levels Example of Prompt, Command, and Result Operator level to Manager level ProCurve> enable Password:_ After you enter enable, the Password prompt appears. After you enter the Manager password, the system prompt appears with the # symbol: ProCurve#_ Manager level to Global configuration level ProCurve# config ProCurve(config)# Global configuration ProCurve(config)# vlan 10 level to a ProCurve(vlan-10)# Context configuration level Context configuration ProCurve(vlan-10)# interface e 3 level ProCurve(int-3)# to another Context configuration level The CLI accepts "e" as the abbreviated form of "ethernet". Move from any level ProCurve(int-3)# exit to the preceding level ProCurve(config)# exit ProCurve# exit ProCurve> Move from any level to the Manager level ProCurve(int-3)# end ProCurve# -or- ProCurve(config)# end ProCurve# Moving Between the CLI and the Menu Interface. When moving between interfaces, the switch retains the current privilege level (Manager or Operator). That is, if you are at the Operator level in the menu and select the Command Line Interface (CLI) option from the Main Menu, the CLI prompt appears at the Operator level. Changing Parameter Settings. Regardless of which interface is used (CLI, menu interface, or web browser interface), the most recently configured version of a parameter setting overrides any earlier settings for that parameter. 4-7