HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 295

Note Configuring for Network Management Applications Using SNMP Tools To Manage the Switch Using SNMP Tools To Manage the Switch Overview You can manage the switch via SNMP from a network management station running an application such as ProCurve Manager (PCM) or ProCurve Manager Plus (PCM+). For more on PCM and PCM+, visit the ProCurve Networking web site at: www.procurve.com Click on products index in the sidebar, then click on the appropriate link appearing under the Network Management heading. This section includes: ■ An overview of SNMP management for the switch ■ Configuring the switches for: • SNMP Communities (page 13-12) • Trap Receivers and Authentication Traps (page 13-18) ■ Information on advanced management through RMON Support (page 13-35) To implement SNMP management, the switch must have an IP address, configured either manually or dynamically (using DHCP or Bootp). If multiple VLANs are configured, each VLAN interface should have its own IP address. For DHCP use with multiple VLANs, refer to the section titled "The Primary VLAN" in the "Static Virtual LANs (VLANs)" chapter of the Advanced Traffic Management Guide for your switch. If you use the switch's Authorized IP Managers and Management VLAN features, ensure that the SNMP management station and/or the choice of switch port used for SNMP access to the switch are compatible with the access controls enforced by these features. Otherwise, SNMP access to the switch will be blocked. For more on Authorized IP Managers, refer to the Access Security Guide for your switch. (The latest version of this guide is available on the ProCurve Networking web site.) For information on the Management 13-3