HP 915 User Guide - Page 55
Copy a two- black-and-white document, Start Copy Black, Start Copy Color, Related topics
View all HP 915 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 8 4. Press the Start Copy Black or Start Copy Color button to increase the number of copies up to a maximum of 9 (varies by model). NOTE: The HP All-in-One waits very briefly for another button press. Pause for a while before pressing the Start Copy Black or Start Copy Color button again to start the copy job. TIP: Use the software that you installed with the HP All-in-One to set the number of copies higher than 9. 5. Press Start Copy Black or Start Copy Color. In this example, the HP All-in-One makes six copies of the original 10 x 15 cm (4 x 6 inch) photo. Use the copy features Related topics Control panel buttons Copy a two-page black-and-white document You can use the HP All-in-One to copy a single- or multiple-page document in color or black and white. In this example, the HP All-in-One is used to copy a two-page blackand-white original. To copy a two-page document from the control panel 1. Make sure you have paper loaded in the input tray. 2. Place your original with the side you want to copy or scan face down on the left front corner of the glass. 3. Press the Paper Type button to set the paper type. 4. Press Start Copy Black. 5. Remove the first page from the glass and load the second page. 6. Press Start Copy Black. Related topics Control panel buttons 52 Use the copy features