HP d640 HP D640 High-Volume Printer - User Manual (Printer and Accessories), C - Page 145
Press Done, following the next two steps
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Fuser Kit - Replacing the Fuser 3. Maintain pressure on the fuser and finger-tighten the fuser locking knob clockwise to engage the frame and secure the fuser into position as shown in Figure 4-37. If the fuser does not seat properly, do not force it. Instead, refer to Figure 4-37 while following the next two steps: a) Hold the fuser up against the printer using light pressure. b) Carefully rotate the decurler roller knob clockwise until you feel the gears turn easily and the fuser seats flush against the printer. Tighten the fuser locking knob. Decurler roller knob Fuser locking knob Figure 4-37 Fuser Locking Knob and Decurler Roller Knob 4. Verify all locks and levers are secure and then close the front door. 5. Press Done. 4-32 Ordering and Replacing Consumables