HP d640 HP D640 High-Volume Printer - User Manual (Printer and Accessories), C - Page 163
Perform the Paper Path Alignment procedure described in Adjusting Paper Path
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
HCI Pick Roller Kit - Replacing the HCI Pick Rollers 3. On the back of the HCI, carefully extend and install each retaining spring to the lower roller assembly. The retaining springs have a "holder" to pull on while extending the spring. See Figure 4-70. Figure 4-70 Installing Retaining Springs 4. Push the HCI against the printer to lock it into place. Add paper to the HCI and close the HCI door, as shown in Figure 4-71. LTR LTR LTR Figure 4-71 Closing the HCI Door 5. Press Done on the Control Panel. 6. Perform the Paper Path Alignment procedure described in "Adjusting Paper Path Alignment" on page 6-11. 4-50 Ordering and Replacing Consumables
HCI Pick Roller Kit - Replacing the HCI Pick Rollers
4-50
Ordering and Replacing Consumables
3.
On the back of the HCI, carefully extend and install each retaining spring to the lower
roller assembly. The retaining springs have a "holder" to pull on while extending the
spring. See Figure 4-70.
Figure 4-70
Installing Retaining Springs
4.
Push the HCI against the printer to lock it into place. Add paper to the HCI and close the
HCI door, as shown in Figure 4-71.
Figure 4-71
Closing the HCI Door
5.
Press Done on the Control Panel.
6.
Perform the Paper Path Alignment procedure described in “Adjusting Paper Path
Alignment” on page
6-11.
LTR
LTR
LTR