HP d640 HP D640 High-Volume Printer - User Manual (Printer and Accessories), C - Page 167

Paper Feed Area, Paper Input Trays

Page 167 highlights

Weekly Cleaning Paper Feed Area To clean the paper feed area, follow these steps: 1. Open the lower right cover. 2. Use the supplied cleaning cloths to wipe up any toner or dust off the paper feed mechanisms in this area, on the inside area and on the cover area. Clean all the way down to the base of the printer to ensure a thorough cleaning. See Figure 5-3. Caution To avoid damage to the paper sensors in the paper feed area, wipe the area from bottom to top. Figure 5-3 Cleaning Paper Feed Area 3. Close the lower right cover. Paper Input Trays To clean the inside of the paper input trays, follow these steps: 1. Remove tray3 from the printer, then remove any paper in it. 2. Use the vacuum cleaner to remove any paper dust or chips from the tray. 3. Reinstall the paper in the tray, and the tray in the printer. 4. Repeat steps 1 - 3 for the other two trays. 5-4 Maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293

Weekly Cleaning
5-4
Maintenance
Paper Feed Area
To clean the paper feed area, follow these steps:
1.
Open the lower right cover.
2.
Use the supplied cleaning cloths to wipe up any toner or dust off the paper feed
mechanisms in this area, on the inside area and on the cover area. Clean all the way
down to the base of the printer to ensure a thorough cleaning. See Figure 5-3.
Caution
To avoid damage to the paper sensors in the paper feed area, wipe the area from
bottom to top.
Figure 5-3
Cleaning Paper Feed Area
3.
Close the lower right cover.
Paper Input Trays
To clean the inside of the paper input trays, follow these steps:
1.
Remove tray3 from the printer, then remove any paper in it.
2.
Use the vacuum cleaner to remove any paper dust or chips from the tray.
3.
Reinstall the paper in the tray, and the tray in the printer.
4.
Repeat steps 1 - 3 for the other two trays.