HP d640 HP D640 High-Volume Printer - User Manual (Printer and Accessories), C - Page 200

Advanced Topics Configuring for LaserJet IIIsi and 4si Compatibility If HCI-Alias is set to HCI, the values shown below in Table -6-1, "Paper tray map for HCIAlias = HCI" are correct. If HCI-Alias is set to tray2, then you can send a job to either a 4si or a D640. Table 6-1 Paper tray map for HCI-Alias = HCI IIIsi, 4si upper tray lower tray n/a n/a D640 upper tray (tray1) middle tray (tray2) High Capacity Input lower drawer (tray3) 5si upper drawer (tray2) lower drawer (tray3) High Capacity Input fold out tray (tray1) You can also set the default paper tray (used if there is no paper size or paper source command embedded in the print job) from the Control Panel. Use the intray setting in the Printing Menu. Using the LaserJet 5Si Driver The D640 printer can be used with a LaserJet 5Si printer driver, but there are many differences. For example: • The input tray selection is different. See Table 6-1 above. • The D640 printer does not support media type selection. • The LaserJet 5Si does not support font cartridges. Advanced Topics 6-25