HP d640 HP D640 High-Volume Printer - User Manual (Printer and Accessories), C - Page 43

Control Panel Custom Menu Settings Once you have highlighted the submenu selection (Figure 2-8), press the Select function button to activate your selection and return to the previous level. The Online function button will change to Save. You can make further changes to the settings, or press Save to store your new settings and return the printer to a Ready -- free state. Note Changes to menu settings can only be made in the Ready -- free state. If you try to make a change and see the message "menus locked", it means that the printer is processing a print job and changes cannot be made Changes to settings are not permanently saved unless you press the Save button after making all configuration changes. When you press Save, your new settings are stored in the power-on configuration. If you do not Save, the new settings are only active until you change them again, cycle power, or print a job that contains a reset command. Custom Menu Settings The printer provides a means to maintain three different Control Panel custom configurations. This allows you to pre-program configurations for later use. Configuration items available under the Printing, Configuration, PCL, Comms, and some of the Maintenance submenus are saved as part of the custom settings. 1. On the Main Screen, press Custom to display Figure 2-10: Custom Restore Save Online Online Figure 2-10 Custom Menu 2. Use į or Ĭ to highlight your selection: Restore Save Restore is used to recall the printer's power-on configuration, factory default configuration, or one of the three custom configurations. Save is used to store a new configuration as the power-on configuration or one of the three custom settings. All configurations are stored in the printer. Control Panel 2-9