IBM 88410EU User Manual - Page 122
compatible.
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Note: See "System replaceable units" on page 144 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 1762 (Hard disk configuration error) 1. Hard disk drive. 2. Hard disk cables. 3. Run the Configuration/Setup Utility program. 4. Hard disk adapter. 5. SCSI backplane. 6. System board. 178X (Fixed disk error) 1. Hard disk cables. 2. Run diagnostics. 3. Hard disk adapter. 4. Hard disk drive. 5. System board. 1800 (No more hardware interrupt available for PCI adapter) 1. Verify that all adapters are compatible. 2. Run the Configuration/Setup Utility program. 3. Failing adapter. 4. System board. 1962 (Drive does not contain a valid boot sector) 1. Verify that a startable operating system is installed. 2. Run diagnostics. 3. Hard disk drive. 4. SCSI backplane. 5. Cable. 6. System board. 2400 (Video controller test failure) 1. Video adapter (if installed) 2. System board 2462 (Video memory configuration error) 1. Video adapter (if installed) 2. System board 5962 (IDE CD-ROM drive configuration error) 1. Run the Configuration/Setup Utility program. 2. CD-ROM drive. 3. CD-ROM power cable. 4. IDE cable. 5. System board. 6. Battery. 8603 (Pointing-device error) 1. Pointing device 2. If a KVM switch has been installed, make sure that it is pointing to the correct server and that it is functional. 3. System board 0001200 (Machine check architecture error) 1. If possible, update BIOS code and service processor firmware. 2. Microprocessor 1 3. Optional microprocessor 2 00012000 (Microprocessor machine check) 1. If possible, update BIOS code and service processor firmware. 2. Microprocessor 3. System board 112 xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide