IBM 88410EU User Manual - Page 16
Keyboard, connector, Mouse, Parallel, Serial, Ethernet, status, connectors, Video, power
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Rear view The following illustration shows the connectors and LEDs on the rear of the server. Keyboard connector Mouse connector ASM Ethernet link LED Remote Supervisor Adapter II SlimLine Ethernet Ethernet activity LED Power cord connector AC power LED DC power LED Parallel connector Serial 1 connector USB 1 connector Ethernet link 2 status LED Ethernet connectors 1 and 2 USB 2 connector Video connector Ethernet link 1 status LED POWER SUPPLY FILLER ATTENTION: REQUIRED FOR SYSTEM COOLING WITH EMPTY SLOT DO NOT THROW AWAY Serial 2 connector Keyboard connector: Connect a PS/2 keyboard to this connector. Mouse connector: Connect a mouse or other PS/2 device to this connector. Parallel connector: Connect a parallel device to this connector. Serial 1 connector: Connect a 9-pin serial device to this connector. USB 1 connector: Connect a USB device to this connector. Ethernet link 1 status LED: This LED is on the Ethernet connector. When this LED is lit, there is an active connection on the Ethernet port 1. Ethernet connectors 1 and 2: Use these connectors to connect the server to a network. Ethernet link 2 status LED: This LED is on the Ethernet connector. When this LED is lit, there is an active connection on the Ethernet port 2. Serial 2 connector: Connect a 9-pin serial device to this connector. Video connector: Connect a monitor to this connector. USB 2 connector: Connect a USB device to this connector. DC power LED: This green LED provides status information about the power supply. During typical operation, both the ac and dc power LEDs are lit. For any other combination of LEDs, see "Light path diagnostics" on page 93. 6 xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide