IBM 88410EU User Manual - Page 72
Power, reset
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Power reset card Complete the following steps to remove the power reset card. Note: v Read "Installation guidelines" on page 11. v Read Appendix B, "Safety information," on page 153. v Read "Handling static-sensitive devices" on page 12. 1. Turn off the server. 2. Disconnect all external cables and power cords from the back of the server. 3. Remove the bezel (see "Removing the bezel" on page 16). 4. Remove the server cover (see "Removing the left-side cover" on page 14). 5. Disconnect and remove adapters and spacers (see "Installing or replacing an adapter" on page 25). 6. Remove the central-fan and adapter-support bracket (see "Center-fan and adapter-support bracket" on page 67). 7. Remove the air baffle. 8. Disconnect the power reset card cable from the system board (J42). 9. Press the tab on the front of the power reset card and lift it out from inside the chassis. To replace the power reset card, reverse the previous steps, threading the cable carefully. 62 xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide