IBM 88410EU User Manual - Page 80
Adapter-support, bracket
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Complete the following steps to remove the center-fan support bracket as a single unit: 1. Disconnect the cable that is attached to the center-fans connector on the system board (see "System-board internal connectors" on page 78). 2. Remove the center-fan support bracket. a. Press the release tab on each end of the center-fan support bracket. There are two latches; one at each end of the center-fan support bracket. b. Slide the center-fan support bracket unit out of the guides; then, remove it from the server. Note: To reinstall the center-fan support bracket and other components that you removed or disconnected, reverse the preceding steps. Remember to reroute the cables that you disconnected and to reconnect the center-fan cable to the system board (see "System-board internal connectors" on page 78). Adapter-support bracket Note: v Read "Installation guidelines" on page 11. v Read Appendix B, "Safety information," on page 153. v Read "Handling static-sensitive devices" on page 12. When working with some options, you must first remove the adapter-support bracket to access certain components or connectors on the system board. 70 xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide