IBM 88410EU User Manual - Page 38
Installing, replacing, hot-plug, adapter
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing or replacing a hot-plug adapter (slot 6) You do not have to turn off the server to install hot-plug adapters in the hot-plug slots. However, you must turn off the server when performing any steps that involve installing or removing cables. The following illustration shows how to install a PCI or PCI-X hot-plug adapter. Adapterretention latch Tab Adapter PCI-X divider Adapterretention clip Adapter-support bracket Complete the following steps to install or replace a hot-plug PCI or PCI-X adapter: 1. Read the safety information beginning on page v and "Installation guidelines" on page 11. 2. Remove the cover. 3. Open the adapter-retention latch and remove the expansion-slot cover from the server. Attention: Expansion slot covers must be installed on all empty slots. This maintains the electronic emissions characteristics of the server and ensures proper cooling of system components. 28 xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide