IBM 88410EU User Manual - Page 57
Input/output
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
The following illustration shows how to install the left-side cover on the server. Slots Left-side cover Complete the following steps to install the server left-side cover: 1. Before installing the cover, check that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server. 2. Place the bottom lip of the left-side cover over the bottom edge of the server chassis. 3. Rotate the left-side cover to a vertical position, inserting the tabs at the top of the left-side cover into the matching slots in the server chassis. 4. Slide the left-side cover forward until it locks in place. 5. If you disconnected any cables from the back of the server, reconnect the cables; then, connect the power cords to properly grounded electrical outlets. Note: If necessary, see "Input/output connectors" on page 51 for connector locations. Chapter 3. Installing options 47