IBM 88410EU User Manual - Page 79
Center-fan, support, bracket, guide
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6. Remove the center-fan and adapter-support bracket. a. Press the release tab on each adapter-support bracket latch. There are two latches; one at each end of the adapter-support bracket. b. Slide the adapter-support bracket and fan-support bracket unit out of the guides; then, remove it from the server. Note: To reinstall the adapter-support bracket and other components that you removed or disconnected, reverse the preceding steps. Remember to reroute the cables that you disconnected and to reconnect the center-fan cable to the system board (see "System-board internal connectors" on page 78). Center-fan support bracket (dual fan guide) Note: v Read "Installation guidelines" on page 11. v Read Appendix B, "Safety information," on page 153. v Read "Handling static-sensitive devices" on page 12. When working with some options, you must first remove the center-fan to access certain components or connectors on the system board. Chapter 4. Service replaceable units 69