IBM 88410EU User Manual - Page 52
Replacing, battery
View all IBM 88410EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
c. Position the heat sink over the microprocessor and slide one of the tabs on the heat sink into the slot on the retention bracket. Heat sink Retainer spring Heat-sink locking lever Microprocessor d. Push the heat sink into position firmly; then, let it rest on the microprocessor. e. Close the heat-sink locking lever to secure the heat sink to the microprocessor. 8. Replace the air-baffle assembly and cover. Go to "Completing the installation" on page 45. Replacing the battery The following notes describe information that you must consider when replacing the battery: v When the battery voltage becomes low, the Battery Error LED on the system board is lit and the battery should be replaced as quickly as possible. v IBM has designed this product with your safety in mind. The lithium battery must be handled correctly to avoid possible danger. If you replace the battery, you must adhere to the following instructions. Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal. v If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal components, be aware of the following environmental consideration. Batteries and accumulators that contain heavy metals must not be disposed of with normal domestic waste. They will be taken back free of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a proper manner. v To order replacement batteries, call 1-800-426-7378 within the United States, and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada, call your IBM reseller or IBM marketing representative. Note: After you replace the battery, you must reconfigure the server and reset the system date and time. 42 xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide