IBM HS12 Service Guide - Page 101
Run the Configuration/Setup Utility program, Configuration/Setup Utility program Using
![]() |
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 4, "Parts listing, Types 8014, 8028 and 1916," on page 25 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 184 Bad power-on password. 1. Run the Configuration/Setup Utility program ("Using the Configuration/Setup Utility program" on page 15), select Load Default Settings and save the settings. 2. Reseat the battery - See "Removing the battery" on page 57 and "Installing the battery" on page 58. 3. Replace the following components one at a time, in the order shown, restarting the blade server each time: a. Battery - See "Removing the battery" on page 57 and "Installing the battery" on page 58. b. (Trained service technician only) System-board assembly - See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. 188 Bad EEPROM CRC #2 (Trained service technician only) Replace the system-board assembly - See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. 189 Three attempts to enter the incorrect Restart the blade server, run the password. Configuration/Setup Utility program ("Using the Configuration/Setup Utility program" on page 15), and change the power-on password ("Using passwords" on page 18). Chapter 6. Diagnostics 89
![](/manual_guide/products/ibm-hs12-service-guide-b4c349d/101.png)