IBM HS12 Service Guide - Page 119
SERR/PERR Detected on PCI bus no, on and Installing an optional
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 4, "Parts listing, Types 8014, 8028 and 1916," on page 25 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 00150700 PERR: Secondary signaled parity error Slot=xx Vendor ID=xxxx Device ID=xxxx Status=xxxx 1. If an optional expansion unit is installed, reseat it - See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. 2. Reseat the I/O expansion card in slot xx; then, restart the blade server. 3. Replace the following components, one at a time, in the order shown, restarting the blade server each time: a. I/O expansion card in slot xx - b. Optional expansion unit (if one is installed) See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. c. (Trained service technician only) System-board assembly - See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. 00150900 SERR/PERR Detected on PCI bus (no source found) 1. If an optional expansion unit is installed, reseat it - See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. 2. Reseat each I/O expansion card, restarting the blade server each time. 3. Replace the following components, one at a time, in the order shown, restarting the blade server each time: a. I/O expansion card in slot xx - b. Optional expansion unit (if one is installed) See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. c. (Trained service technician only) System-board assembly - See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. Chapter 6. Diagnostics 107