IBM HS12 Service Guide - Page 15
IBM Systems support, BladeCenter HS12 - specifications
![]() |
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
eserver.html to verify that the blade server supports the installed operating system, optional devices, and software levels. If any hardware or software component is not supported, uninstall it to determine whether it is causing the problem. You must remove nonsupported hardware before you contact IBM or an approved warranty service provider for support. b. Make sure that the blade server, operating system, and software are installed and configured correctly. Many configuration problems are caused by loose power or signal cables or incorrectly seated adapters. You might be able to solve the problem by turning off the blade server, reconnecting cables, reseating adapters, and turning the blade server back on. For information about performing the checkout procedure, see "Checkout procedure" on page 112. For information about configuring the blade server, see Chapter 3, "Configuring the blade server," on page 15. 6. See controller and management software documentation. If the problem is associated with a specific function (for example, if a RAID hard disk drive is marked offline in the RAID array), see the documentation for the associated controller and management or controlling software to verify that the controller is correctly configured. Problem determination information is available for many devices such as RAID and network adapters. For problems with operating systems or IBM software or devices, complete the following steps. Note: Changes are made periodically to the IBM website. The actual procedure might vary slightly from what is described in this document. a. Go to http://www.ibm.com/systems/support/. b. Under IBM Systems support, click BladeCenter. c. From the Product family list, select BladeCenter HS12. d. Under Support & downloads, click Documentation, Install, and Use to search for related documentation. 7. Check for troubleshooting procedures and RETAIN tips. Troubleshooting procedures and RETAIN tips document known problems and suggested solutions. To search for troubleshooting procedures and RETAIN tips, complete the following steps. Note: Changes are made periodically to the IBM website. The actual procedure might vary slightly from what is described in this document. a. Go to http://www.ibm.com/systems/support/. b. Under IBM Systems support, click BladeCenter. c. From the Product family list, select BladeCenter HS12. d. Under Support & downloads, click Troubleshoot. e. Select the troubleshooting procedure or RETAIN tip that applies to your problem: v Troubleshooting procedures are under Diagnostic. v RETAIN tips are under Troubleshoot. 8. Use the troubleshooting tables. See "Troubleshooting tables" on page 114 to find a solution to a problem that has identifiable symptoms. A single problem might cause multiple symptoms. Follow the troubleshooting procedure for the most obvious symptom. If that procedure does not diagnose the problem, use the procedure for another symptom, if possible. Chapter 1. Start here 3
![](/manual_guide/products/ibm-hs12-service-guide-b4c349d/15.png)