IBM HS12 Service Guide - Page 173
on For additional troubleshooting information, go
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
v See Chapter 4, "Parts listing, Types 8014, 8028 and 1916," on page 25 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 215-902-xxx Failed the optical drive self test due to a read miscompare. 1. Insert a new CD or DVD into the drive and wait for 15 seconds for the media to be recognized; then, rerun the test. See "Diagnostic tools overview" on page 67. 2. Make sure that the cable for the optical drive is securely connected at both ends of the cable and tighten any loose connections. See your BladeCenter documentation for information about the optical drive (media tray). 3. Make sure that the cable for the optical drive is not damaged and replace the cable if damage is present. See your BladeCenter documentation for information about the optical drive (media tray). 4. Rerun the test. See "Diagnostic tools overview" on page 67. 5. For additional troubleshooting information, go to http://www.ibm.com/support/ docview.wss?uid=psg1MIGR-41559. 6. Rerun the test. See "Diagnostic tools overview" on page 67. 7. Replace the CD or DVD drive. See your BladeCenter documentation for information about replacing the optical drive (media tray). 8. If the failure remains, collect the data from the DSA event log and send it to IBM Service. For information about contacting and sending data to IBM Service, go to http://www.ibm.com/ support/docview.wss?uid=psg1SERV-CALL. Chapter 6. Diagnostics 161