IBM HS12 Service Guide - Page 86
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
![]() |
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 4, "Parts listing, Types 8014, 8028 and 1916," on page 25 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Beep code Description Action 3-2-2 Parallel port failed (Trained service technician only) Replace the system-board assembly. See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. 3-3-2 Critical SMBUS error occurred. 1. Turn-off the blade server (see ) and reseat it in the BladeCenter unit. See "Removing the blade server from the BladeCenter unit" on page 33 and "Installing the blade server in a BladeCenter unit" on page 34. 2. Reseat the DIMMs. See "Removing a memory module" on page 44 and "Installing a memory module" on page 46. 3. Replace the following components one at a time, in the order shown, restarting the blade server each time: a. DIMMs - See "Removing a memory module" on page 44 and "Installing a memory module" on page 46. b. (Trained service technician only) System-board assembly - See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. 74 BladeCenter HS12 Type 8014, 8028 or 1916: Problem Determination and Service Guide
![](/manual_guide/products/ibm-hs12-service-guide-b4c349d/86.png)