IBM HS12 Service Guide - Page 19
Blade server controls and LEDs, Microprocessor, Memory, Drives, Predictive Failure Analysis PFA - maximum memory
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Table 1. Features and specifications Microprocessor: Supports one Intel® Predictive Failure Analysis (PFA) Environment: LGA-771 microprocessor alerts: v Air temperature: Note: Use the Configuration/Setup Utility program to determine the type and speed of the microprocessors in the blade server. v Microprocessor v Memory v Hard disk drives Electrical input: 12 V dc - Blade server on: 10°C to 35°C (50°F to 95°F). Altitude: 0 m to 914.4 m (0 ft to 3000 ft) - Blade server on: 10°C to 32°C (50°F to 89.6°F). Altitude: 914.4 m to 2133.6 m (3000 ft to 7000 ft) Memory: Integrated functions: - Blade server off: 10°C to 43°C v Dual-channel, dual inline memory v Expansion card interface (50°F to 89.6°F). Altitude: 914.4 m modules (DIMMs): 6 DIMM v Local service processor: Baseboard to 2133.6 m (3000 ft to 7000 ft) connectors management controller (BMC) - Blade server shipping: -40°C to v Type: ECC double-data rate (DDR2 with Intelligent Platform 60°C (-40°F to 140°F) 667) DRAM. Supports 512 MB, 1 Management Interface (IPMI) v Humidity: GB, 2 GB, and 4 GB DIMMs with firmware - Blade server on: 8% to 80% up to 24 GB of total memory on the v ATI ES1000 video controller - Blade server off: 8% to 80% system board v LSI 1064E SAS controller (type Drives: Support for a pair of one of the following storage drives: v Hot-swap, small form factor (SFF) Serial Attached SCSI (SAS) hard disk drives, and hot-swap solid 8028 and 1916) v SATA controller (type 8014) v Concurrent keyboard/video/ mouse (cKVM) support when optional cKVM feature card is installed Size: v Height: 24.5 cm (9.7 inches) v Depth: 44.6 cm (17.6 inches) v Width: 2.9 cm (1.14 inches) v Maximum weight: 4.8 kg (10 lb) state storage drives. v Light path diagnostics v Fixed SFF Serial Advanced Technology Attachment (SATA) hard disk drives v Fixed SFF SATA solid state storage drives v RS-485 interface for communication with the management module v Automatic server restart (ASR) v USB 2.0 for communication with the cKVM and removable media drives v Serial over LAN (SOL) v Redundant buses for communication with keyboard, mouse, and removable media drives Blade server controls and LEDs Use this information for details about the controls and LEDs on the blade server. Note: The control panel door is shown in the closed position in the following illustration. To access the power-control button, you must open the control panel door. Chapter 2. Introduction 7