IBM HS12 Service Guide - Page 160

Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 4, "Parts listing, Types 8014, 8028 and 1916," on page 25 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 405-002-xxx Passed the EEPROM test on the system board. N/A 405-903-xxx Failed the EEPROM test on the system board. 1. Make sure that the component firmware level is up-to-date, upgrade if necessary; then, rerun the test. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component. The latest level firmware for this component can be found on the IBM support Web site at http://www.ibm.com/support/ docview.wss?uid=psg1MIGR-4JTS2T. 2. If the failure remains, refer to Chapter 5, "Removing and replacing blade server components," on page 31 to replace the failed component. 405-003-xxx Passed the Internal memory test. N/A 405-904-xxx Failed the Internal memory test. 1. Make sure that the component firmware level is up-to-date, upgrade if necessary; then, rerun the test. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component. The latest level firmware for this component can be found on the IBM support Web site at http://www.ibm.com/support/ docview.wss?uid=psg1MIGR-4JTS2T. 2. If the failure remains, refer to Chapter 5, "Removing and replacing blade server components," on page 31 to replace the failed component. CPU stress tests Use this information to view CPU stress test error codes and resolve CPU stress test errors. Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. 148 BladeCenter HS12 Type 8014, 8028 or 1916: Problem Determination and Service Guide