IBM HS12 Service Guide - Page 91
If an action step is preceded by Trained service technician only, that step must
![]() |
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 4, "Parts listing, Types 8014, 8028 and 1916," on page 25 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error message Action BEM 1 fault 1. Reseat the following components one at a time, in the order shown, restarting the blade server each time: a. SAS connectivity card - See "Removing a storage interface card" on page 53 and "Installing a storage interface card" on page 54. b. RAID battery - See "Removing the battery" on page 57 and "Installing the battery" on page 58. c. Optional expansion unit - See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. 2. Replace the optional expansion unit - See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. BEM 2 fault 1. Reseat the optional expansion unit - See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. 2. Replace the optional expansion unit - See "Removing an optional expansion unit" on page 37 and "Installing an optional expansion unit" on page 38. High-speed expansion card fault 1. Reseat the high-speed expansion card See "Removing an I/O expansion card" on page 50 and "Installing an I/O expansion card" on page 51. 2. Replace the high-speed expansion card See "Removing an I/O expansion card" on page 50 and "Installing an I/O expansion card" on page 51. Chapter 6. Diagnostics 79
![](/manual_guide/products/ibm-hs12-service-guide-b4c349d/91.png)