IBM HS12 Service Guide - Page 146
Diagnostic text messages, Viewing the test log, Next Cat, Prev Cat, Hardware Info, Passed, Failed
![]() |
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
not controlled by the blade server, you cannot use the Next Cat and Prev Cat buttons to select categories. All other mouse-selectable functions are available through function keys. To view server configuration information such as system configuration, memory contents, interrupt request (IRQ) use, direct memory access (DMA) use, or device drivers, select Hardware Info from the top of the screen. Diagnostic text messages Use this information to understand the diagnostic text messages that display while the tests are running. A diagnostic text message contains one of the following results: Passed: The test was completed without any errors. Failed: The test detected an error. User Aborted: You stopped the test before it was completed. Not Applicable: You attempted to test a device that is not present in the blade server. Aborted: The test could not proceed because of the blade server configuration. Warning: The test could not be run. There was no failure of the hardware that was being tested, but there might be a hardware failure elsewhere, or another problem prevented the test from running; for example, there might be a configuration problem, or the hardware might be missing or is not being recognized. The result is followed by an error code or other additional information about the error. Viewing the test log Use this information to view the test log of the blade server. You can use one of the following methods to access the test log when the tests are completed: v From the DSA command line, issue the DSA CLI View command or select the Diagnostic Event Log option from the DSA graphical user interface (GUI) v From the DSA interactive menu, select the getextendedresults option. v From the DSA interactive menu, select the View option to view all of the collected results and error log data. v In the DSA GUI, select DSA Error Log from the System Information page. You can send the DSA error log file to IBM service and support to aid in diagnosing the server problems or you can use the DSA CLI copy command to copy the log to an external USB device. 134 BladeCenter HS12 Type 8014, 8028 or 1916: Problem Determination and Service Guide
![](/manual_guide/products/ibm-hs12-service-guide-b4c349d/146.png)