IBM HS12 Service Guide - Page 115
Microprocessor - See Removing a, Processor P failed BIST
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 4, "Parts listing, Types 8014, 8028 and 1916," on page 25 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 00012000 Processor machine check 1. (Trained service technician only) Reseat the microprocessor - See "Removing a microprocessor and heat sink" on page 60 and "Installing a microprocessor and heat sink" on page 62. 2. Replace the following components one at a time, in the order shown, restarting the blade server each time: a. (Trained service technician only) Microprocessor - See "Removing a microprocessor and heat sink" on page 60 and "Installing a microprocessor and heat sink" on page 62. b. (Trained service technician only) System-board assembly - See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. 000197 Processor P failed BIST 1. (Trained service technician only) Reseat the microprocessor - See "Removing a microprocessor and heat sink" on page 60 and "Installing a microprocessor and heat sink" on page 62. 2. Replace the following components, one at a time, in the order shown, restarting the blade server each time: a. (Trained service technician only) Microprocessor - See "Removing a microprocessor and heat sink" on page 60 and "Installing a microprocessor and heat sink" on page 62. b. (Trained service technician only) System-board assembly - See "Removing the system-board assembly" on page 65 and "Installing the system-board assembly" on page 66. Chapter 6. Diagnostics 103