Konica Minolta AccurioPress C2060 IC-314 User Guide - Page 105

Using the Konica Minolta FD-5/FD-7 spectrophotometer to measure a color chart and create a profile 95 Using the Konica Minolta FD-5/FD-7 spectrophotometer to measure a color chart and create a profile Requirements: ● The press must already be calibrated. ● The Konica Minolta FD-5/FD-7 spectrophotometer must be connected to the IC‑314 print controller version 1.0 as follows: 1. Connect the FD-5/FD-7 to the IC‑314 print controller version 1.0. 2. Attach the FD-5/FD-7 to the Target Mask. 3. Correctly set the device on the White Calibration plate that has the same pairing number as the device. 4. Push down on the device until you hear a beep. A message appears on the monitor indicating that the device is calibrating. 5. Release the device when you hear a beep indicating that the calibration is complete.