Konica Minolta AccurioPress C2060 IC-314 User Guide - Page 117
Using the X-Rite i1 spectrophotometer to validate a color profile
View all Konica Minolta AccurioPress C2060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Using the X-Rite i1 spectrophotometer to validate a color profile 107 Using the X-Rite i1 spectrophotometer to validate a color profile Requirements: ● Your spectrophotometer must be connected to the USB port on the IC‑314 print controller version 1.0. The first time that you connect the device to the IC‑314 print controller version 1.0, you are notified that the driver is being installed. Wait for the driver installation to finish before proceeding further. ● Make sure that your spectrophotometer is calibrated by placing the spectrophotometer on its calibration plate. ● The Print queue must be ready for printing (not suspended), and the printer must be warmed up. 1. From the Tools menu, select Validation Tool. 2. In the Measuring device list, select i1. The following message appears while the IC‑314 print controller version 1.0 connects to the i1. 3. In the Tray list, select the tray from which you want to print. The paper size in the selected tray appears.