Konica Minolta AccurioPress C2060 IC-314 User Guide - Page 257

Creating a custom mark set 247 Creating a custom mark set Create a custom mark set for your job. The IC‑314 print controller version 1.0 includes a set of predefined marks. These marks cannot be edited or deleted. 1. In the Resource Center window, in the Resource list, select Mark Sets. 2. To create a new mark set, click Add Mark Set. A new mark set is created and assigned the name Custom Mark (by default). 3. Type a name for the mark set, and then press Enter. 4. Click Add Mark Type (+). to view the types of marks that you can add to the mark set. 5. Add the marks that you want to be printed, and edit the options accordingly. You can go back later and change the settings if required. The new mark set is added to the list of mark sets. You can apply these mark settings in the job parameters window by selecting Finishing > Special Marks. Note: When you enable the Align Back to Front option, the mark on the back side overlaps the mark on the front side. Adding a bar code Add a bar code to a mark set, and define the bar code data code in the Resource Center window. The IC‑314 print controller version 1.0 provides four predefined types of bar codes: