Konica Minolta AccurioPress C2060 IC-314 User Guide - Page 95
Creating a destination profile using an external device
View all Konica Minolta AccurioPress C2060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Creating a destination profile using an external device 85 Creating a destination profile using an external device Create a destination profile with the i1, iSis, or i1iO spectrophotometer or with the Konica Minolta FD-5/FD-7 or FD-9 spectrophotometer using the Profiling tool. See also: Using the i1 spectrophotometer to measure a color chart and create a profile on page 85 Using the iSis automated chart reader to measure a color chart and create a profile on page 87 Using the i1iO Automated Scanning Table to measure a color chart and create a profile on page 88 Using the Konica Minolta FD‑9 spectrophotometer to measure a color chart and create a profile on page 90 Using the Konica Minolta FD-5/FD-7 spectrophotometer to measure a color chart and create a profile on page 95 Creating a profile from existing color chart measurements on page 98 Using the i1 spectrophotometer to measure a color chart and create a profile Requirements: ● The press must already be calibrated. ● The i1 spectrophotometer must be placed on its base and connected to the USB port on the IC‑314 print controller version 1.0. 1. From the Tools menu, select Profiling Tool. 2. Select Print and measure chart. 3. Click Next. 4. Perform the following actions: a. In the Measuring device list, select the i1 spectrophotometer as the measuring device that you will use to measure the color chart. b. In the Warm up copies box, select the number of copies of the warm-up file that you want to print. c. In the Tray list, select the tray in which the paper stock for which you want to create a profile is loaded. d. In the Screening list, select the screening method for the profile.