Panasonic PT-DZ12000U Operating Instructions - Page 106
Using the, serial terminals
UPC - 791871111550
View all Panasonic PT-DZ12000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Using the serial terminals The main unit is equipped with SERIAL terminals located in its connection terminals, and this terminal is compliant with RS-232C/RS-422. Also a serial output terminal is provided to enable plural projector control. Examples of connection For RS-232C z Single projector D-Sub 9-pin (female) PC RS-232C IN RS-422 IN SERIAL RS-422 OUT Connection terminals on projector D-Sub 9-pin (male) z Multiple projectors Communication cable (straight) D-Sub 9-pin (female) D-Sub 9-pin (male) D-Sub 9-pin (female) D-Sub 9-pin (male) PC RS-232C IN RS-422 IN SERIAL RS-422 OUT RS-232C IN RS-422 IN SERIAL RS-422 OUT Connection terminals on projector 1 Connection terminals on projector 2 D-Sub 9-pin (male) D-Sub 9-pin (female) D-Sub 9-pin (male) Communication cable (straight) Communication cable (straight) Pin assignments and signal names D-Sub 9-pin (female), external appearance Serial input terminal Pin Signal No. name 1 2 TXD 3 RXD 4 5 GND 6 7 CTS 8 RTS 9 Description NC Send data Receive data Connected internally Ground NC Connected internally NC Communication conditions (Factory setting) Signal level Synchronization method Baud rate Parity Character length Stop bit X parameter S parameter RS-232C-compliant Start-stop synchronization 9 600bps None 8 bits 1 bit None None 106 - ENGLISH