Panasonic PT-DZ12000U Operating Instructions - Page 63
▲▼, ◄►
UPC - 791871111550
View all Panasonic PT-DZ12000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
• OFF: Geometry correction is not performed. • KEYSTONE: This adjusts projected images when they are distorted to a trapezoid. • CURVED: This adjusts projected images when they are distorted to a curved surface. • PC: This is for performing geometry correction from a PC. 3. Select "KEYSTONE" or "CURVED" in Step 2, and then press ENTER. • The "GEOMETRY:KEYSTONE" or "GEOMETRY:CURVED" screen will be displayed. GEOMETRY:KEYSTONE VERTICAL KEYSTONE 0 VERTICAL SUB KEYSTONE 0 GEOMETRY:CURVED LENS THROW RATIO 0 VERTICAL KEYSTONE 0 4. Press ▲▼ to select the desired adjustment item, and press ◄► to adjust the correction amount. • You can adjust the projection images as shown below. KEYSTONE menu: • VERTICAL KEYSTONE • LINEARITY CURVED menu: • LENS THROW RATIO Set to the throw ratio being used (the projection distance divided by the screen width). (pp. 22-24) • VERTICAL KEYSTONE • HORIZONTAL KEYSTONE • VERTICAL ARC • HORIZONTAL ARC Basic Operation • VERTICAL SUB KEYSTONE • HORIZONTAL KEYSTONE • VERTICAL BALANCE • HORIZONTAL BALANCE • HORIZONTAL SUB KEYSTONE Note • If vertical keystone correction is set, menus and logos may be projected outside of the actual image area. • If both edge blending adjustment and geometry correction are used, set the geometry correction to curved-surface correction or PC. If geometry correction is set to keystone-distortion correction, edge blending adjustment cannot be made correctly. (p. 66) ENGLISH - 63