Panasonic PT-DZ12000U Operating Instructions - Page 58
Registering the picture mode, settings as presettings, Setting the, system selector
UPC - 791871111550
View all Panasonic PT-DZ12000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Adjusting the picture (continued) AUTO IRIS (Automatic aperture adjustment) OFF (No automatic adjustment) 1 (Low) 3 (High) 2 (Intermediate) MANUAL IRIS (Fixed aperture adjustment) OFF (No fixed iris) 1 (Low) 63 (High) 2ʜ62 (Intermediate) DYNAMIC GAMMA (signal compensation amount adjustment) OFF (No automatic correction) 1 (Low) 3 (High) 2 (Intermediate) Note • The contrast is set to the maximum level when "DYNAMIC IRIS" is set to "3". Registering the picture mode settings as presettings The picture settings that have been made in the PICTURE MODE screen can be registered. • Select "PICTURE MODE" in the "PICTURE" screen to carry out this operation. 1. Press ENTER. • A confirmation screen will appear. SAVE AS DEFAULT SETTING FOR DYNAMIC? OK CANCEL CHANGE ENTER EXECUTE 2. Press ◄► to select "OK". 3. Press ENTER. Note • If the registered picture mode is selected after registering the picture mode settings as presettings, the new signals will be displayed with the registered adjustments. Setting the system selector This enables the projector to automatically recognize input signals. Furthermore, if unstable signals are input, the system format can be selected manually. 1. Press ▲▼ to select "SYSTEM SELECTOR". NOISE REDUCTION DYNAMIC IRIS SYSTEM SELECTOR OFF OFF AUTO1 2. Press ENTER. • The "SYSTEM SELECTOR" screen will be displayed. SYSTEM SELECTOR C AUTO1 AUTO2 3. Press ▲▼ to switch "SYSTEM SELECTOR", and then press ENTER. • The system formats that can be selected differ depending on the input signals. S-video / Video terminal input signal Select from AUTO1, AUTO2, NTSC, NTSC4.43, PAL, PALM, PAL-N, SECAM, and PAL60. Note • Press the DEFAULT button to return to "AUTO1". • "AUTO1" automatically selects from NTSC, PAL, SECAM, NTSC4.43, and PAL60. "AUTO2" automatically selects from NTSC, PAL-M, and PAL-N. RGB1 / RGB2 / DVI-D terminal input signal Select from RGB and YPBPR. Note • Refer to the types of signals compatible with the projector. (pp. 122-123) Input module ET-MD77SD1: Select from AUTO, 480i and 576i. ET-MD77SD3: Select from AUTO, 1 080/60i, 1 035/60i, 720/60p, 1 080/24p, 1 080/50i, 1 080/30p, 1 080/25p, 1 080/24sF, 720/50p, and 480i, 576i. 58 - ENGLISH