Panasonic PT-DZ12000U Operating Instructions - Page 123

Display mode Number of displayed dots Scanning frequency H (kHz) V (Hz) MAC21 1 280 × 768 1 280 × 800 MSXGA SXGA SXGA+ WXGA+ UXGA WSXGA+ 1 152 × 870 1 280 × 768 1 280 × 768 1 280 × 800 1 280 × 800 1 280 × 960 1 280 × 1 024 1 280 × 1 024 1 280 × 1 024 1 280 × 1 024 1 280 × 1 024 1 280 × 1 024 1 400 × 1 050 1 400 × 1 050 1 400 × 1 050 1 440 × 900 1 600 × 1 200 1 680 × 1 050 68.7 75.1 39.6 49.9 47.8 59.9 41.3 50 49.7 59.8 60 60 52.4 50 64 60 72.3 66.3 78.2 72 80 75 91.1 85 65.2 60 78.8 72 82.2 75 55.9 59.9 75 60 65.3 60 1 920 × 1 080*1 1 920 × 1 080 66.6 59.9 WUXGA*1 1 920 × 1 200 74 60 *1: Only when using VESA CVT RB (Reduced Blanking) Dot clock frequency (MHz) 100 65.3 79.5 68 83.5 108 88 108 125 135.1 135 157.5 122.6 149.3 155.9 106.5 162 146.3 138.5 154 Format RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI RGB/DVI Plug and play RGB2 DVI-D EDID1 DVI-D EDID2 ̋ ̋ ̋ ̋ ̋ ̋ ̋ ̋ ̋ ̋ ̋ ̋ Note • The number of display dots of the PT-D12000U is 1 400 x 1 050, and the number of display dots of the PT-DZ12000U is 1 920 x 1 200. A signal of a different resolution than the above data is converted to the number of display dots and then displayed. • Character "i" that follows the number of displayed dots stands for interlace signal. • Flicker (line flicker) will be caused in images if interlace signals are connected. Information ENGLISH - 123