Panasonic PT-DZ12000U Operating Instructions - Page 33
Getting Started, Connecting the signal to the, SD-SDI input module, HD/SD-SDI input module
UPC - 791871111550
View all Panasonic PT-DZ12000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Getting Started Connecting the signal to the SD-SDI input module SD-SDI input module (optional) ET-MD77SD1 (for 480i/576i) SD-SDI Module IN OUT ET-MD77SD1 SERIAL LAN LAN terminal*1 (10BASE-T/100BASE-TX) SD-SDI signal SD-SDI signal output (active through) Professional Digital VCR Note • If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being input. • You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 58-59) *1: The LAN terminal present on the optional input module cannot be used with the PT-D12000U/PT-DZ12000U. Use the LAN terminal that is provided as standard with the projector. Connecting the signal to the HD/SD-SDI input module HD/SD-SDI input module (optional) ET-MD77SD3 (for HD/SD) HD/SD-SDI Module IN OUT ET-MD77SD3 SERIAL LAN HD-SDI or SD-SDI signal LAN terminal*1 (10BASE-T/100BASE-TX) HD-SDI or SD-SDI signal output (active through) Professional Digital VCR Note • You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 58-59) • If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being input. • To ensure full imaging performance, use a connecting cable with the specifications of Canare 5CFB or higher, or of Belden1694A or higher. (For example: Canare 5CFB, 5CFTX, 7CFB, Belden1694A, etc.) *1: The LAN terminal present on the optional input module cannot be used with the PT-D12000U/PT-DZ12000U. Use the LAN terminal that is provided as standard with the projector. ENGLISH - 33