Brother International XL-6452 User Manual - French - Page 38
Lower, Threading
View all Brother International XL-6452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
)2( 4 6 , is o 2 Lower Threading A CAUTION Settingthebobbin improperlymay cause the thread tension to loosen, breaking the needle and resulting in injury. C) Wound evenly Wound poorly A CAUTION Besuretotumallthepower. Ityouaccidentallysteponthe foot controller and the machine begins to operate, injury could result. 1. Raise the needle to its highest position by turning the balance wheel toward you (counterclockwise) and raise the presser foot lever. 2, Slide the button and open the cover. ® Slide button C) Cover 3. Insert the bobbin so the thread comes out in the direction shown by the arrow. • Use bobbins intended for use with this machine. A CAUTION Besure the bobbinisset so the threadunrolls In the correct direction.If the threadunrollsinthe wrong direction,itmay cause the thread tension to be incorrect or the needle to break. Hold the thread end, push the bobbin down with your finger, and pass the thread securely through the thread cutting groove. r 4. Replace the bobbin cover. Place the left tab in place (see arrow 1 at left), then press lightly on the right side (see arrow 2 at left) until the cover clicks into place. • Insert the cover so that the end of the thread comes out from the back of the cover (as shown by the slanted line in the illustration • at the left). 29