Brother International XL-6452 User Manual - French - Page 40

Lauthummuinuill

Get Brother International XL-6452 PDF manuals and user guides View all Brother International XL-6452 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

5 5l 1 5 \31 l ilumumnumnnnni Lauthummuinuill! 7 0- 0 31 Upper Threading 1. Raise the presser foot using the Presser Foot Lever. 2. Raise the needle to its highest position by turning the balance wheel toward you (counterclockwise). C) Presser foot lever 3. Place a spool of thread on the horizontal spool pin and press a spool cap onto the spool pin to hold the thread spool firmly in place. The thread end should come from the bottom front of the spool. A CAUTION If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break. Use the spool cap (large, medium, or small) that is closest in size to the thread spool. If a spool cap smaller than the thread spool is used, the thread may become caught in the slit on the end of the spool and cause the needle to break. A CAUTION Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury. 4. Deliver the upper thread as shown in this diagram. 5. Make sure to guide the thread through the thread take-up lever from the right to the left. 0 Thread take-up lever 6. Place thread behind the guide above the needle. NOTE: If the thread take-up lever Is lowered, the upper thread can not be wrapped around the thread take-up lever. Be sure to raise the Presser Foot Lever and the thread take-up before feeding the upper thread. Incorrectly feeding the thread may cause sewing problems.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
5
5l
1
5
l
i
lumumnumnnnni
\
31
Lauthummuinuill!
0-
7
0
Upper
Threading
1.
Raise
the
presser
foot
using
the
Presser
Foot
Lever.
2.
Raise
the
needle
to
its
highest
position
by
turning
the
balance
wheel
toward
you
(counterclockwise).
C)
Presser
foot
lever
3.
Place
a
spool
of
thread
on
the
horizontal
spool
pin
and
press
a
spool
cap
onto
the
spool
pin
to
hold
the
thread
spool
firmly
in
place.
The
thread
end
should
come
from
the
bottom
front
of
the
spool.
A
CAUTION
If
the
thread
spool
and/or
spool
cap
are
set
incor-
rectly,
the
thread
may
tangle
on
the
spool
pin
and
cause
the
needle
to
break.
Use
the
spool
cap
(large,
medium,
or
small)
that
is
closest
in
size
to
the
thread
spool.
If
a
spool
cap
smaller
than
the
thread
spool
is
used,
the
thread
may
become
caught
in
the
slit
on
the
end
of
the
spool
and
cause
the
needle
to
break.
A
CAUTION
Be
sure
to
thread
the
machine
properly.
Improper
threading
can
cause
the
thread
to
tangle
and
break
the
needle,
leading
to
injury.
4.
Deliver
the
upper
thread
as
shown
in
this
diagram.
5.
Make
sure
to
guide
the
thread
through
the
thread
take-up
lever
from
the
right
to
the
left.
0
Thread
take-up
lever
6.
Place
thread
behind
the
guide
above
the
needle.
NOTE:
If
the
thread
take-up
lever
Is
lowered,
the
upper
thread
can
not
be
wrapped
around
the
thread
take-up
lever.
Be
sure
to
raise
the
Presser
Foot
Lever
and
the
thread
take-up
before
feeding
the
upper
thread.
Incorrectly
feeding
the
thread
may
cause
sewing
problems.
31