Brother International XL-6452 User Manual - French - Page 42

0 1; 4 0 -1 Using Needle Threader Turn power switch to "O". 1. Lower the presser foot lever. 2. Turn the balance wheel toward you (counter-clockwise) to raise the needle holder to the highest position. 0 Needle holder Needle threader lever CAUTION When usingtheneedlethreader,be suretheneedleholder is Inthehighestposition.Otherwise,thehook may be damaged. 3. While lowering the needle threader lever, hook the thread onto the guide. 4. Pull down the needle threader lever as much as possible, then rotate the lever toward the back of the machine (away from you). Make sure that the hook passes through the eye of the needle and grabs the thread. • Hold the thread in front of the needle in order to make sure that the hook grabs It. C) Needle holder I Needle threader lever C) Guide ® Hook holder 5. While lightly holding the thread, rotate the needle threader lever toward the front of the machine (toward you). The hook will pull the thread through the needle. 0 Hook 0 Thread 6. Raise the needle threader lever and pull out about 5 cm (2") of thread through the needle toward the back of the sewing machine. A CAUTION The needle threader can only be used with home sewing machine needles size 75/11-100/16. Check the table on page 39 for appropriate needle and thread combinations. Notethat,ifyouareusing transparentnylonmono-filament thread, only needles in the range of 90/14-100/16 can be used. A CAUTION The needle threader can not be used to thread the needle whenyouareusingdecorativethreads orspecialtyneedles like the twin needle and wing needle. When using those types of threads or needles, thread the eye of the needle manually. Make sure the main power switch is OFF when threading the needle manually. 33