Cisco 7912G Administration Guide - Page 151
Table A-1, Network Parameters continued, Use the specified domain name string
UPC - 746320852409
View all Cisco 7912G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Appendix A Additional Configuration Methods, Parameters, and Procedures Configuration Parameters Table A-1 Network Parameters (continued) Parameter StaticNetMask Domain DnsServer1 DnsServer2 Description Usage Static subnet mask of the phone when DHCP is not used. Enter the subnet mask for the phone. This value is ignored when the Dhcp parameter is enabled. Domain name on the network in which the phone operates, used in the creation of the endpoint identifier. Alphanumeric string up to 31 characters. For example, if the name of the endpoint is aaln1 and the domain is cisco.com, the endpoint identifier is [email protected]. • 0-Use the DHCP-provided domain name if available; otherwise use the static IP address. • string-Use the specified domain name string and overwrite any DHCP-provided domain name. The default setting is 0. IP address of the primary DNS server. The address specified overwrites the primary DNS server address supplied by DHCP. Set 0 or 0.0.0.0 if you want the phone to use the address supplied by DHCP. The default setting is 0. Note Do not specify a port number. The Cisco IP Phone uses the default DNS port. IP address of the secondary DNS server. The address specified overwrites the secondary DNS server address supplied by DHCP. Set 0 or 0.0.0.0 if you want the phone to use the address supplied by DHCP. The default setting is 0. Note Do not specify a port number. The Cisco IP Phone uses the default DNS port. Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G OL-6313-01 A-13