Cisco 7912G Administration Guide - Page 157
Audio Parameters
UPC - 746320852409
View all Cisco 7912G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Appendix A Additional Configuration Methods, Parameters, and Procedures Configuration Parameters Audio Parameters Table A-3 describes the network parameters that you can configure through a phone's profile file or through its Audio Parameters web page. Table A-3 Audio Parameters Parameter AudioMode Description Allows control of audio-related functions. Usage Bit map, as follows: • Bit 0 (mask 0x1)-If 0, disable G.711 or G.729 silence suppression. If 1, enable G.711 or G.729 silence suppression. The default setting is 1 • Bit 1 (mask 0x2)-If 0, use G.711 codec only; do not use low-bit-rate codec. If 1, use both G.711 and low-bit-rate codec. • Bits 2-3 (mask 0x4)-Reserved for future use. • Bits 4-5 (mask 0x30): DTMF transmission method: - 0-Always in-band. - 1-By negotiation. - 2-Always out-of-band. - 3-Neither in-band nor out-of-band. • Bits 6-31-Reserved for future use. Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G OL-6313-01 A-19