Cisco 7912G Administration Guide - Page 73

Chapter 4 Configuring Network Settings on the Cisco IP Phone Verifying Network Settings Using the Phone's Network Configuration Screen (Cisco IP Phone Models 7905G/7912G) Procedure Step 1 Step 2 Step 3 Step 4 Press the Menu button. Use the Navigation button to select Settings, and then press the Select softkey. Use the Navigation button to select Network Configuration, and then press the Select softkey. Scroll through the options to display the settings described in Table 4-1. Table 4-1 Network Settings Network Setting DHCP Server BootP Server MAC Address Host Name Domain Name IP Address Subnet Mask Description Usage Notes Displays IP address of the Dynamic Host See the "Modifying DHCP Configuration Protocol (DHCP) server Settings" section on page 4-9. that the phone uses to obtain IP address. Indicates whether the phone obtains its Always displays No. configuration from a Bootstrap Protocol Cannot be configured. (BootP) server rather than a DHCP server. Identifies the unique Media Access Control (MAC) address of the phone. Cannot configure. Identifies the unique host name assigned Obtained from the DHCP to the phone. server. Identifies the name of the Domain Name See the "Assigning a Domain System (DNS) domain in which the phone Name" section on page 4-20. resides. Indicates the Internet Protocol (IP) address of the phone. See the "Assigning an IP Address" section on page 4-15. Indicates the subnet mask used by the phone. See the "Assigning a Subnet Mask" section on page 4-19. Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G OL-6313-01 4-5