Dell 1135N User Guide - Page 118
Output bin Full, in MP Tray
View all Dell 1135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
DHCP The IP address assignment is failed. This Change the IP address assignment method to problemReconfigure happens, when Auto IP for DHCP is not BOOTP or Static. If you do not change this BOOTP set in Embedded Web Service. option, the DHCP server continually asks to assign the IP Address. Document Jam. Remove Jam The loaded original has jammed in the ADF. Clear the jam (See Clearing original document jams). Door Open. Close it The front cover is not securely latched. Close the cover until it locks into place. End of lifeReplace new cart The indicated toner cartridge has reached its estimated cartridge life. The printer stops printing. Replace the toner cartridge (See Replacing the toner cartridge). Error [error number] Turn off then on Install Toner Load [media size] in [tray number] Memory Full Remove Job Network Problem: IP Conflict No Answer Not Compatible toner cartridge Output bin Full Remove paper Paper Empty in [tray number] Pulled Out [tray number] Cassette Paper Jam in MP Tray Paper Jam in Tray 1 Paper Jam inside machine Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752 (See Available supplies). The number of pages may be affected by operating environment, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even when End of life Replace new cart appears and the printer stops printing. A systematic error has occurred Reboot the power and try the printing job again. If the problem persists, call for service. The toner cartridge is installed improperly, or not installed. There is no corresponding paper in the corresponding tray. Reinstall the toner cartridge two or three times to confirm it is seated properly. If the problem persists, the toner cartridge is not being detected. Contact the service representatives. Load corresponding paper in the corresponding tray (See Loading paper in the tray). The memory is full. The IP address is used elsewhere. Press the left/right arrow to highlight Cancel or Start, then press OK. If you select Cancel, the machine stops the fax job. If you select Start, the machine only sends scanned documents of the fax job. Check the IP address or obtain a new IP address. The receiving fax machine has not answered after several redial attempts. The toner cartridge is not suitable for your machine. The output tray is full. Or the sensor is not facing down. There is no paper in the indicated tray. The indicated tray cassette is not inserted, or not properly closed. Try again. Make sure that the receiving machine is operational. Install the corresponding toner cartridge with a Dell-genuine cartridge (See Replacing the toner cartridge). Remove papers from the output tray, the machine resumes printing. Or make sure the sensor is facing down. If the problem persists, call for service. Load paper in the tray (See Loading paper in the tray). To close the tray, lower the rear edge, align it with the slot, and slide it into the printer. Paper has jammed in the manual tray area. Paper has jammed in the tray1 area. Clear the jam (See In the manual tray). Clear the jam (See In tray 1). Paper has jammed inside the machine. Clear the jam (See Inside the machine).