Dell 1135N User Guide - Page 97
Printing Network Configuration report, Setting IP address, IP setting using control panel - driver windows 10
View all Dell 1135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Printing Network Configuration report You can print a Network Configuration Report from the machine's control panel that will show the current machine's network settings. This will help you to set up a network and troubleshoot problems. 1. Press Menu ( ) on the control panel. 2. Press the left/right arrow until Network appears and press OK. 3. Press the left/right arrow until Network Info. appears and press OK. 4. Press the left/right arrow until Yes appears and press OK. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: MAC Address:00:15:99:41:A2:78 IP Address:192.0.0.192 Setting IP address First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons. DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report. Static IP assignment: Use SetIP program to change the IP address from your computer. If your machine has a control panel, you can also change IP address using the machine's control panel. In an office environment, we recommend that you contact a network administrator to set this address for you. IP setting using control panel 1. Connect your machine to the network with a network cable. 2. Turn on the machine. 3. Press Menu( ) on the control panel. 4. Press the left/right arrow until Network appears and press OK. 5. Press the left/right arrow until TCP/IP (IPv4) appears and press OK. 6. Press the left/right arrow until Static appears and press OK. 7. Press the left/right arrow until IP Address appears and press OK. 8. Enter the IP address using numeric keypad and press OK. Enter a byte between 0 and 255 using the number keypad and press the left/right arrow to move between bytes. Repeat this to complete the address from the 1st byte to the 4th byte. 9. Enter other parameters, such as the Subnet Mask and Gateway appears and press OK. 10. After entering all parameters, press Stop/Clear to return to ready mode. Now go to Installing network connected machine's driver. IP setting using SetIP Program (Windows) This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. A MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. For using SetIP program, disable the computer firewall before continuing by performing the following: 1. Open Control Panel. 2. Double click Security Center. 3. Click Windows Firewall. 4. Disable the firewall. Installing the program