Dell 1135N User Guide - Page 4
Operating method, Installation / Moving, Caution, Warning - printer instructions
View all Dell 1135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
If the machine has been dropped, or if the cabinet appears damaged, unplug the machine from all interface connections and request assistance from qualified service personnel. Otherwise, this could result in electric shock or fire. If the machine exhibits a sudden and distinct change in performance, unplug the machine from all interface connections and request assistance from qualified service personnel. Otherwise, this could result in electric shock or fire. This could result in electric shock or fire and/or injury to your pet. If the machine does not operate properly after these instructions have been followed, unplug the machine from all interface connections and request assistance from qualified service personnel. Otherwise, this could result in electric shock or fire. Operating method Caution Do not forcefully pull the paper out during printing. It can cause damage to the machine. When printing large quantities, the bottom part of the paper output area may get hot. Do not allow children to touch. Children may be burned. Be careful not to put your hand between the machine and paper tray. You may get injured. When removing jammed paper, do not use tweezers or sharp metal objects. It can cause damage to the machine. Do not block or push objects into the ventilation opening. Do not allow too many papers to stack up in the paper output tray. This could result in elevated component temperatures which can cause damage or fire. It could cause damage to the machine. Use care to avoid paper cuts when replacing paper or removing jammed paper. You may get hurt. This machine's power interception device is the power cord. To switch off the power supply, remove the power cord from the electrical outlet. Installation / Moving Warning Do not place the machine in an area with dust, humidity or water leaks. This could result in electric shock or fire. Caution When moving the machine, turn the Do not put a cover over the machine or place it in an airtight power off and disconnect all cords; location, such as a closet. then lift the machine with at least two If the machine is not well-ventilated, this could result in fire. people are required to lift printer. The machine could fall, causing human injury or machine damage. Do not place the machine on an unstable surface. Make sure you plug the power cord into a grounded electrical outlet. The machine could fall, causing human injury or Otherwise, this could result in electric shock or fire. machine damage. The machine should be connected to the power level which is specified on the label. If you are unsure and want to check the power level you are using, contact the electrical utility company. Do not overload wall outlets and extension cords. This can diminish performance, and could result in electric shock or fire. Use only No.26 AWG[a] or larger, telephone line cord, if necessary. Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (79") with a 140V machine, then the gauge should be