Dell C1765NFW Dell Users Guide - Page 147

Fax Settings Purpose: To display the basic fax settings. Values: Receive Mode Auto Rec Fax Auto Rec Fax/Tel Auto Rec Ans/Fax Line Monitor Ring Tone Volume Line Type Tone/Pulse Resend Delay Redial Attempts Redial Delay Junk Fax Setup Remote Receive Remote Rcv Tone Fax Header Fax Header Name Fax Number Fax Cover Page DRPD Pattern Sent Fax Fwd Fax Fwd Number Prefix Dial Prefix Dial Num Discard Size ECM Modem Speed Fax Activity Displays the fax receiving mode. Displays the interval at which the printer goes into the fax receive mode after receiving an incoming call. Displays the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call. Displays the interval at which the printer goes into the fax receive mode after the external answering machine receives an incoming call. Displays the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a connection is made. Displays the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker when Receive Mode is set to Telephone/Fax. Displays the line type. Displays the dialing type. Displays the interval between transmission attempts. Displays the number of redial attempts. Displays the interval between redial attempts. Displays whether to reject faxes sent from unwanted numbers. Displays whether to receive faxes by pressing a remote receive code on the external telephone. Displays the remote receive code to start Remote Receive. Displays whether to print the information of sender on the header of faxes. Displays the name of sender to be printed on the header of faxes. Displays the fax number to be printed on the header of faxes. Displays whether to attach a cover page to faxes. Displays the Distinctive Ring Pattern Detection (DRPD) setting. Displays whether to forward incoming faxes to a specified destination. Displays the fax number of the destination to which incoming faxes are to be forwarded. Displays whether to set a prefix dial number. Displays a prefix dial number. This number dials before any auto dial number is started. Displays whether to discard text or images at the bottom of a fax page when the entire page does not fit onto the output paper. Displays whether to enable the Error Correction Mode (ECM). Displays the fax modem speed when a fax transmission or reception error occurs. Displays whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications. Understanding the Tool Box Menus 145