Dell C1765NFW Dell Users Guide - Page 181
Reset Wireless Dell C1765nfw Color Multifunction Printer only, TCP/IP, Protocol, IP Mode, Dual Stack
View all Dell C1765NFW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Reset Wireless (Dell C1765nfw Color Multifunction Printer only) Purpose: To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values. No* Does not reset the wireless setting. Yes Resets the wireless setting. NOTE: This item is displayed when the Ethernet cable is disconnected and Wi-Fi is set to On. TCP/IP Purpose: To configure TCP/IP settings. The change takes effect after the printer is turned off and then on. Values: IP Mode IPv4 Dual Stack* IPv4 Mode Get IP Address IP Address Subnet Mask Gateway Address AutoIP* BOOTP RARP DHCP Panel Uses both IPv4 and IPv6 to set the IP address. Uses IPv4 to set the IP address. Automatically sets the IP address. Uses BOOTP to set the IP address. Uses RARP to set the IP address. Uses DHCP to set the IP address. Enables the IP address entered on the operator panel. Manually sets the IP address allocated to the printer. Manually sets the subnet mask. Manually sets the gateway address. Protocol Purpose: To enable or disable each protocol. The change takes effect after the printer is turned off and then on. Values: LPD Port9100 WSD SNMP E-Mail Alert Disable Enable* Disable Enable* Disable Enable* Disable Enable* Disable Enable* Disables the Line Printer Daemon (LPD) port. Enables the LPD port. Disables the Port9100 port. Enables the Port9100 port. Disables the Web Services on Devices (WSD) port. Enables the WSD port. Disables the Simple Network Management Protocol (SNMP) UDP port. Enables the SNMP UDP port. Disables the E-Mail Alert feature. Enables the E-Mail Alert feature. Understanding the Printer Menus 179