Dell C1765NFW Dell Users Guide - Page 162

Redial Delay Junk Fax Setup Remote Receive Remote Rcv Tone Fax Header Fax Header Name Fax Number Fax Cover Page DRPD Pattern Sent Fax Fwd Fax Fwd Number Prefix Dial Prefix Dial Num Discard Size ECM Modem Speed Fax Activity Available Range: 1-15 minutes Off On Off On Available Range: 00-99 On Off Off On Pattern1-7 Off Forward Print and Forward Off On Off On Auto Reduction On Off 2.4 4.8 9.6 14.4 33.6 Auto Print No Auto Print Specifies the interval between redial attempts. Does not reject faxes sent from unwanted numbers. Rejects faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered in the Phone Book. Disables the remote receive feature. Receives a fax by pressing a remote receive code on the external telephone after picking up the handset of the telephone. Specifies the remote receive code in two digits to start Remote Receive. Prints the information of sender on the header of faxes. Does not print the information of sender on the header of faxes. Sets the name of sender to be printed on the header of faxes. Up to 30 alphanumeric characters can be entered. Sets the fax number of the printer to be printed on the header of faxes. Does not attach a cover page to faxes. Attaches a cover page to faxes. Provides a separate number for faxing with a distinctive ring pattern. Does not forward incoming faxes. Always forwards incoming faxes to a specified destination. Always forwards incoming faxes to a specified destination and prints all forwarded incoming faxes. Specifies the fax number of the destination to which incoming faxes will be forwarded. Does not set a prefix dial number. Sets a prefix dial number. Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started. It is useful for accessing the Private Automatic Branch Exchange (PABX). Prints any excess at the bottom of a fax page without discarding it. Discards any excess at the bottom of a fax page. Automatically reduces a fax page to fit it onto the output paper. Enables the ECM. To use the ECM, the remote machines must also support the ECM. Disables the ECM. Specifies the fax modem speed when a fax transmission or reception error occurs. Automatically prints a fax activity report after every 50 incoming and outgoing fax communications. Does not automatically print a fax activity report. 160 Understanding the Tool Box Menus