Epson 6200L Reference Guide - Page 272

Resolution 7 Allows you to select the resolution you want to use for printing. The available settings are 1200 dpi, 600 dpi (default), and 300 dpi. 7 RITech 7 Allows you to turn the RITech (Resolution Improvement Technology) setting on or off. The default setting is On. For more information about RITech, see "Choosing the print quality 7 (EPL-6200 only)" on page 69 (Windows) or "Choosing the print quality (EPL-6200 only)" on page 139 (Macintosh). Auto Continue 7 Permits the printer to automatically recover from a Print Overrun, 7 Insufficient Memory for Current Task, or Change Paper error. The printer continues printing within a few seconds after one of these problems occurs. When Auto Continue is Off, you must press the N Start/Stop 7 button to resume printing. In most cases, leave Auto Continue Off (default) so you can tell when an error occurs and make the necessary corrections. You might want to set Auto Continue to On when printing long jobs or when you are away from the 7 printer for long periods. Density 7 7 Allows you to adjust the print density to make the printout darker or lighter. Click the arrow key to darken or lighten the output. Toner Save 7 You can turn the Toner Save mode On or Off (default). When turned on, the printer saves toner by substituting a gray shade for 7 the black inside of characters. The characters are outlined in full black on the right and lower edges. Using the Remote Control Panel Utility (EPL-6200 only) 272