Epson 6200L Reference Guide - Page 414

The emulation mode is set to something other than Auto or PS3 for the interface that you are using. Change the mode setting to either Auto or PS3. Set the emulation mode using the Remote Control Panel utility. For details, see "Choosing printer emulation" on page 278. The printer does not print normally. (Windows 98/95 only) Cause What to do The computer is connected to The printer may not print normally if the the printer via the parallel computer is connected to the printer via interface and the parallel port the parallel interface and the ECP mode setting is set to the ECP mode. is set. When this is the case, follow the steps below to make sure that the mode setting is correct: (1) Click Start, select Settings, then click Printers. (2) Right-click the icon for the printer, then click Properties. (3) Click the Details tab, then click the Spool Settings button. (4) Select Disable bi-directional support for this printer, then click the OK button. 11 11 11 11 11 11 11 11 11 11 11 11 Troubleshooting 414